Technical specs
EASY MEG is a self-supporting, compact high pressure laminate (HPL), with a weathering resistant decorative surface suitable for exterior applications.
EASY MEG core layers consist of sheets of cellulose fibres impregnated with thermosetting phenolic resins and of one or more surface layers of decorative paper impregnated with thermosetting resins.
EASY MEG’s characteristics do not change or their variations are so slight that no replacement of the panel is necessary.
The material used for EASY MEG F1 complies with the performance requirements of EN 438-6:2016.
Installation set
EASY MEG box contents:
- 4 HPL planks
3050 x 208 x 8 mm - 24 clips
- 24 screws
- 1 positioning
tool
HPL x 4
Closed Joints
Clip x 24
30 x 35 x 2/3 mm
Screw x 24
Open Joints
Clip x 24
30 x 38 x 2/3 mm
Screw x 24
Overlapping
Clip x 24
50 x 35 x 2/3 mm
Screw x 24
Accessories*
Top flashings
Lateral and corner flashings
Support profile
(only for Closed Joint vertical system)
(only for Closed Joint vertical system)
*not included
Fast and easy installation
For a correct installation it is necessary to: install substructure on the wall (1), install the first row of clips (2) with suitable screws (3), and slide/sit the first row of planks (4). After setting the clips and screws (2, 3) of the second row fix your EASY MEG planks using the same methodology.
It is necessary to drill holes of different diameters to allow the expansion of the last two planks on the top: one ∅ 5mm hole (6) and two ∅ 8 mm holes (5) at the sides.
